Dosing Systems

Easy Dose G2 Plus

Precision liquid nitrogen dosing system for high speed lines.
  • Discrete dosing for speeds up to 75.000 bottles/hour and 120.000 cans/hour, continuous flow for higher speeds.
  • Liquid Nitrogen supply at low pressure (max 1.5 bars) by user.
  • Dosing accuracy: 3%
  • Minimum dosing valve opening time of 6ms for easy adjustability of dosed quantity at all line speeds.

easy dose G2 Plus

Base unit including:

    • Fully vacuum jacketed, stainless steel dosing unit. Internal reservoir with mechanical fill level control. Dosing arm with electrical dosing valve. Safety relief valve.
    • Heated nozzle area and gas vent
    • Integrated self generating nozzle purge system. No dedicated nitrogen gas supply required.
    • Remote Siemens S7-1200 control panel with Monochr. Siemens KTP600, 6” touch screen HMI (230V/50Hz or 115V/60Hz) in stainless steel NEMA 4x rated housing.

    • or alternatively
    • Allen Bradley AB1400 control panel with AB Panelview Component 600, 6” touch screen HMI (230V/50Hz or 115V/60Hz) in stainless steel NEMA 4x rated housing.
    • 6 meter electrical cables. 15 meter cable sets are optionally available.
    • Self diagnostics logics with standard 1 alarm relay output (Profibus optionally available)
    • Encoder ready
    • Speed- and dose compensation capabilities
    • 5 recipe storage
    • Speed sensor (proximity).
    • Infrared sensor for bottle detection (Dosing enabled only when container is present).
    • Available languages for HMI and operation manuals : English, German, French, Spanish, Italian
    • Complete operation and service manual


    • Additional LN2 feed line : standard length is 3 meters from tank to doser. Any additional meter should be ordered in this option. Bayonet couplings will be needed in case of lengths longer than 12 meters.
    • A standard 6 meter cables set from the doser to the PLC is included. Instead, a 15 meter set can be ordered optionally.
    • Profibus communication utility between doser and filler
    • Encoder with 10 m cable & shaft coupling (bracket not included). Shaft coupling for 10mm shaft sizes. Amount of containers/revolution to be specified.
    • Additional languages for HMI and operation manuals upon request. The following languages are standard : English, German, French, Spanish, Italian.


    • CIP heater block: automatic nozzle protection (P/N : 55103N)
    • Combi LDV/CIP heater block: combines both benefits of the LDV and CIP heater block (P/N : 55300)
    • 3D/CIP heater block (P/N : 55907N)


    • Stainless steel (height adjustable) support in AISI 304 material (also available in AISI 316 on request).
    • This support can be either on a 2x2 pod or a bottom plate basis.


    easydose g2 g2 plus rev h 29